NOBASIL FKD S
Application :
Datasheets : NOBASIL FKD S
Description
Slab made from mineral fibres, which are bonded with synthetic resin. It is hydrophobic throughout its cross section.
Recomended application - External walls
Product NOBASIL FKD S is intended for thermal, acoustic and fire-fighting insulation of outside walls of the exterior side. Recommended for use in contact insulation systems (ETICS) with the surface finish, where the heat insulator is enshrined on the bearing wall and glued together. The anchor is recommended to use beat or screw coaks meeting the requirements under the ETA. The numberof anchors should be set according to static calculation for the location of the perimeter wall.
Advantages
High vapour permeable of material
(doesn't increase diffusion resistance of external wall)
Excelent thermal insulation properties
Reduction in the thickness of insulation required
Easier handling and application
Low load of structure by self-gravity of insulating material
Increased the passive fire safety of a building
Better absorption of incident noise
Coefficient of thermal conductivity
λ = 0,036 W/mK
Fire classification
A1
Packaging
The appropriate number of slabs is stacked in the form of a bale, which is shrink-wrapped in PE film with logo of Knauf Insulation company. Bales are possible to be delivered separately or on a pallet. Bale is marked with label on which are technical characteristics about the product and recommended method of application.
Technical parameters NOBASIL FKD S
| Thickness (mm) | Width (mm) | Length (mm) | λD [W/mK] | Thermal resistance R (m2K/W) |
|---|---|---|---|---|
| 60 | 500 | 1 000 | 0,036 | 1,65 |
| 80 | 500 | 1 000 | 0,036 | 2,20 |
| 100 | 500 | 1 000 | 0,036 | 2,75 |
| 120 | 500 | 1 000 | 0,036 | 3,30 |
| 140 | 500 | 1 000 | 0,036 | 3,85 |
| 160 | 500 | 1 000 | 0,036 | 4,40 |
| 180 | 500 | 1 000 | 0,036 | 5,00 |
CE Marking code: MW-EN 13162-T5-DS(TH)-CS(10)30-TR10-WS-WL(P)-MU3,5
ES certificate Reg.-Nr.: K1-0751-CPD-146.0-01-02/09
